Crankshaft End Play Inspection

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Measure the crankshaft end play.
- If not as specified, replace the thrust bearing and No.4 lower main bearing or crankshaft so that the specified end play is obtained.
Standard End Play
1. 0.110-0.232 mm {0.00434-0.00913 in}
  
  Fig 1: Measuring Crankshaft End Play
  Courtesy of MAZDA MOTORS CORP.