LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Engine Mechanical - Overhaul - (LF, L3)) >> Cylinder Block (I) Assembly >> Connecting Rod Bearing Assembly Note

Connecting Rod Bearing Assembly Note

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2009 Mazda B2300, 2009 Mazda 5, 2008 Mazda Tribute, 2008 Mazda B2300, and 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the connecting rod bearing to the connecting rod and connecting rod caps, as shown in the figure.
    Fig 1: Installing Connecting Rod Bearing & Cap
    G02831640Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals