LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fwd Axle Shafts) >> Removal & Installation >> Axle Shaft (3.0L) >> Installation >> Lock Nut Installation Note

Lock Nut Installation Note

WARNING: This page is about a different car, the 2004 Mazda 6 and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Install a new lock nut and stake it as shown in the illustration. See Figure . Tighten lock nut to specification, see TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals