LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fwd Axle Shafts) >> Removal & Installation >> Axle Shaft (2.3L) >> Installation >> Axle Shaft Installation Note >> Right Side

Right Side

WARNING: This page is about a different car, the 2004 Mazda 6 and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the axle shaft into the wheel hub.
  2. Insert the axle shaft into the intermediate shaft.
  3. After installation, pull the transaxle side outer ring forward to confirm that the axle shaft is securely held by the clip.
scientia non olet · About LEMON Manuals