LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fwd Axle Shafts) >> Overhaul >> Intermediate Shaft (3.0L) >> Reassembly >> Bearing Assembly Note

Bearing Assembly Note

WARNING: This page is about a different car, the 2004 Mazda 6 and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Install the new bearing using the Bearing Installer (49-H025-001) and a press. See Fig 1 .

NOTE: Press the outer race of the bearing.
Fig 1: Assembling Bearing
G00318697Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals