LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fwd Axle Shafts) >> Overhaul >> Intermediate Shaft (2.3L) >> Reassembly >> Dust Seal (Wheel Side) Assembly Note

Dust Seal (Wheel Side) Assembly Note

WARNING: This page is about a different car, the 2004 Mazda 6 and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply grease to the new dust seal lip.
  2. Install the new dust seal (wheel side) using the Handle (49-F027-003) and the Dust Seal Installer (49-B025-004). See Fig 1 .
Fig 1: Assembling Dust Seal (Wheel Side)
G00318689Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals