LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fwd Axle Shafts) >> Overhaul >> Axle Shaft (M/T) >> Reassembly >> Balls, Inner Ring, Cage Assembly Note

Balls, Inner Ring, Cage Assembly Note

WARNING: This page is about a different car, the 2004 Mazda 6 and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Align the marks and install the balls and cage to the inner ring in the direction shown in the illustration. See Fig 1 .

CAUTION: Install the cage with the offset facing the snap ring groove. If incorrectly installed, the axle shaft may become disengaged.

Install a new snap ring.

Fig 1: Reassembling Cage, Inner Ring & Balls
G00318640Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals