LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fwd Axle Shafts) >> Overhaul >> Axle Shaft (M/T) >> Reassembly >> ABS Sensor Rotor Assembly Note

ABS Sensor Rotor Assembly Note

WARNING: This page is about a different car, the 2004 Mazda 6 and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Set a new ABS sensor rotor on the axle shaft and press it on using the Sensor Rotor Installer (49-B025-006A). See Figure . The correct measurement is 1.02" (26.0 mm).

scientia non olet · About LEMON Manuals