LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fwd Axle Shafts) >> Overhaul >> Axle Shaft (M/T) >> Disassembly >> Balls, Inner Ring, Cage Disassembly Note

Balls, Inner Ring, Cage Disassembly Note

WARNING: This page is about a different car, the 2004 Mazda 6 and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark the inner ring and cage.
    CAUTION: Mark with paint, do not use a punch.
  2. Remove the snap ring using snap-ring pliers.
  3. Turn the cage approximately 30 degree and pull the cage and balls away from the inner ring. See Fig 1 .
Fig 1: Disassembling Inner Ring, Balls & Cage
G00318639Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals