LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Fwd Axle Shafts) >> Removal & Installation >> Front Axle Wheel Hub & Steering Knuckle >> Notes

Front Axle Wheel Hub & Steering Knuckle: Notes

WARNING: This page is about a different car, the 2004 Mazda MPV, 2003 Mazda MPV, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the harness if it is pulled by mistake. Before performing the following procedures, remove the ABS wheel-speed sensor (axle side) and fix it to an appropriate place where the sensor will not be pulled by mistake while servicing the vehicle.
NOTE: In some of the illustrations Axle Shaft, may be referred to as Drive Shaft. The Intermediate Shaft may be referred to as the Joint Shaft.