LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Controls - System & Component Testing) >> Engine Sensors & Switches >> Knock Sensor (KS) >> Protege 2.0L

Protege 2.0L

WARNING: This page is about a different car, the 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, 2001 Mazda MPV, and 2001 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect KS connector. Using ohmmeter, measure resistance between KS connector terminals "A" (Yellow/Blue wire) and "B" (Red wire). Resistance should be about 560,000 ohms at 68°F (20°C). If resistance is not as specified, replace KS.

scientia non olet · About LEMON Manuals