LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - System & Component Testing >> System Tests (Evaporative Emission) >> Canister Vent Solenoid Closing Procedure

Canister Vent Solenoid Closing Procedure

CAUTION: The Canister Vent (CV) solenoid must not be energized for more than nine minutes at one time. Once the CV solenoid is energized and de-energized, adequate time must be allowed for the component to cool adequately. Failure to allow the component to cool may create a false failure in the diagnostics, causing unnecessary repairs.
  1. Connect the WDS or equivalent Tester and select the output test mode.
  2. Select the EVAPCV PID.
  3. Select the ALL OFF mode.
  4. Close the canister vent solenoid by pushing the START button on the WDS or equivalent Tester.
scientia non olet · About LEMON Manuals