LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Removal, Overhaul & Installation >> Fuel System >> Fuel Pressure Regulator >> Removal & Installation (Millenia, Protege, Protege5 & 626)

Removal & Installation (Millenia, Protege, Protege5 & 626)

  1. Disconnect negative battery cable. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE .
  2. Disconnect vacuum and fuel hose(s) from regulator. Remove regulator mounting bolts. Remove regulator and "O" ring from fuel rail.
  3. To install, reverse removal procedure. Using NEW "O" ring. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals