LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Removal, Overhaul & Installation >> Air Induction Systems >> Upper Intake Manifold >> Removal & Installation (Millenia 2.3L)

Removal & Installation (Millenia 2.3L)

  1. Disconnect negative battery cable. Remove dynamic chamber cover. Remove Charge Air Cooler (CAC) air duct and air cleaner assembly. Remove fresh air duct and connecting air duct. Remove Mass Airflow (MAF) sensor and air intake hose.
  2. Remove air resonator. Remove right and left CACs with connecting hoses (if needed) from air intake pipe assembly. Disconnect accelerator cable. Remove EGR valve. Disconnect vacuum lines and harness connector from upper intake manifold assembly. Remove upper intake manifold assembly.
  3. To install, replace upper intake manifold gasket (if necessary). Install upper intake manifold bolts/nuts and tighten in crisscross pattern to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals