LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Removal, Overhaul & Installation >> Air Induction Systems >> Throttle Body >> Removal & Installation (B2300, B3000, B4000 & Tribute)

Removal & Installation (B2300, B3000, B4000 & Tribute)

  1. Disconnect negative battery cable. Disconnect Throttle Position (TP) sensor harness connector. Remove splash shield (if equipped) to expose throttle linkage.
  2. Disconnect throttle cable and cruise control cable (if equipped) from throttle lever on throttle body. Remove air cleaner-to-throttle body air inlet tube. Disconnect canister purge hose from fitting beneath throttle body.
  3. Remove 4 throttle body bolts. Remove throttle body from upper intake manifold. Install NEW throttle body gasket. To complete installation, reverse removal procedure. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals