LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.0L >> Water Pump Belt - 3.0L DURATEC (4V) Without TENSIONER >> Removal

Water Pump Belt - 3.0L DURATEC (4V) Without TENSIONER: Removal

  1. Remove the nuts and the engine appearance cover.
    Fig 1: Removing Engine Appearance Cover
    G01151658Courtesy of MAZDA MOTORS CORP.
  2. Rotate the crankshaft clockwise and remove the water pump belt by walking off the pulley.
    Fig 2: Removing Water Pump Belt
    G01151659Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals