LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.0L >> Water Pump Belt - 3.0L DURATEC (4V) Without TENSIONER >> Installation

Water Pump Belt - 3.0L DURATEC (4V) Without TENSIONER: Installation

  1. Partially start the water pump belt on the pulley.
    Fig 1: Partially Starting Water Pump Belt On Pulley
    G01151660Courtesy of MAZDA MOTORS CORP.
  2. Rotate the crankshaft clockwise and install the water pump belt by walking on the pulley.
  3. Install the engine appearance cover and the nuts.
    Fig 2: Installing Engine Appearance Cover
    G01151661Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals