LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.0L >> Water Pump Belt - 3.0L DURATEC (4V) With TENSIONER >> Removal & Installation

Removal & Installation

  1. Remove the nuts and the engine appearance cover.
    Fig 1: Removing Engine Appearance Cover
    G01151656Courtesy of MAZDA MOTORS CORP.
  2. Rotate the drive belt tensioner clockwise and remove the water pump belt.
    Fig 2: Removing Water Pump Belt
    G01151657Courtesy of MAZDA MOTORS CORP.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals