LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.0L >> Mechanical - General >> Valve - Seat Width

Valve - Seat Width

  1. Measure the valve seat width. If necessary, grind the valve seat to specification. Refer to SPECIFICATIONS .
    1. Measure the intake valve seat width.
    2. Measure the exhaust valve seat width.
    3. Recheck the valve spring installed length after the seats have been ground, and shim the valve springs as necessary to achieve the correct installed spring length.
      Fig 1: Measuring Valve Seat Width
      G01151234Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals