LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.0L >> Mechanical - General >> Cylinder Bore - Taper

Cylinder Bore - Taper

  1. Measure the cylinder bore at the top and bottom. Verify the cylinder bore is within the wear limit. Refer to SPECIFICATIONS . The difference indicates the cylinder bore taper. Bore the cylinder to the next oversize.
    Fig 1: Measuring Cylinder Bore Taper
    G01151273Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals