LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.0L >> Mechanical - General >> Cylinder Bore - Out-Of-Round

Cylinder Bore - Out-Of-Round

  1. Measure the cylinder bore in two directions. The difference is the out-of-round. Refer to SPECIFICATIONS . Verify the out-of-round is within the wear limit and bore the cylinder to the next oversize limit.
    Fig 1: Measuring Cylinder Bore
    G01151272Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals