LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.0L >> Crankshaft Rear Oil Seal >> Installation

Crankshaft Rear Oil Seal: Installation

NOTE: Lubricate the crankshaft rear oil lips with SAE 5W-20 motor oil.
  1. Using the special tools, install the crankshaft rear oil seal.
    Fig 1: Installing Crankshaft Rear Oil Seal
    G01151701Courtesy of MAZDA MOTORS CORP.
  2. Install the flexplate. Refer to FLEXPLATE .
scientia non olet · About LEMON Manuals