LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.0L >> Accessory Drive >> Inspection & Verification

Inspection & Verification

  1. Verify the customer's concern by operating the engine to duplicate the condition.
  2. Inspect to determine if any of the following mechanical concerns apply:
    Fig 1: Visual Inspection Chart
    G01151648Courtesy of MAZDA MOTORS CORP.
    NOTE: Minor cracks in the V-grooved portion of the drive belt are considered normal and acceptable. If the drive belt has chunks missing from the ribs, a new drive belt should be installed.

    Install a new drive belt if any of the following conditions exist: rib chunk-out, severe glazing, frayed cords or other concerns.

  3. Inspect for drive belt cracking/chunking/wear.
    Fig 2: V-Ribbed Serpentine Drive Belt With Cracks Across Ribs
    G01151649Courtesy of MAZDA MOTORS CORP.
    Fig 3: V-Ribbed Serpentine Drive Belt With Chunks of Rib Missing
    G01151650Courtesy of MAZDA MOTORS CORP.