LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.0L >> Accessory Drive Belt TENSIONER - 3.0L DURATEC (4V) >> Removal & Installation

Removal & Installation

  1. Remove the accessory drive belt. Refer to ACCESSORY DRIVE BELT .
  2. Remove the bolt and the accessory drive belt tensioner.
    Fig 1: Removing Accessory Drive Belt Tensioner
    G01151662Courtesy of MAZDA MOTORS CORP.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals