LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Cooling System - 3.0L >> Degas Bottle/Low Coolant Level Sensor >> Removal and Installation

Removal and Installation

  1. Drain the engine cooling system. Refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
    Fig 1: Locating Degas Bottle
    G00985681Courtesy of MAZDA MOTORS CORP.
  2. Remove the degas bottle.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals