LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System & Drum Brake System >> Overhaul >> Wheel Cylinder >> Reassembly

Wheel Cylinder: Reassembly

CAUTION: Always install new piston seals and dust boots when assembling the rear wheel cylinder. Always lubricate the bore with new brake fluid. Use DOT 3 brake fluid.

To assemble, reverse the disassembly procedure. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS  . Bleed air from system. See BLEEDING BRAKE SYSTEM  .

scientia non olet · About LEMON Manuals