LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System & Drum Brake System >> Adjustments >> Parking Brake Cable >> Vehicles With High Series Floor Console

Vehicles With High Series Floor Console

NOTE: Numbers in parenthesis refer to numbers in illustration.
  1. Apply the parking brake (1). Remove the floor console finish panel (2). See Fig 1 .
  2. Remove the adjustment nut clip.
  3. Turn the parking brake control adjustment nut so that the parking brake control stroke is three to five notches when pulled. See Figure .
  4. Confirm the parking brake is applied.
  5. Install the adjustment nut clip.
  6. Install the floor console finish panel.
Fig 1: Removing Floor Console Finish Panel
G00303141Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals