LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Power Sun Roofs >> Removal & Installation >> Roof Opening Panel Shield >> Removal and Installation

Removal and Installation

  1. Remove the roof opening panel. For additional information, refer to ROOF OPENING PANEL.
    Fig 1: Removing Water Channel
    G01144816Courtesy of MAZDA MOTORS CORP.
  2. Remove the water channel.
    1. Remove the water channel.
    2. Remove the water channel.
  3. Slide the roof opening panel shield forward.
    Fig 2: Removing Roof Opening Panel Shield
    G01144817Courtesy of MAZDA MOTORS CORP.
  4. Remove the roof opening panel shield.
    1. Disengage the four spring loaded guides.
    2. Remove the roof opening panel shield.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals