LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Body & Frame >> Power Seats >> Rear Seat Backrest - Bench >> Removal and Installation

Removal and Installation

Fig 1: Removing Rear Seat Backrest Nuts And Bolts
G01144747Courtesy of MAZDA MOTORS CORP.
  1. Remove the rear seat backrest.
    1. Remove the two nuts and two bolts.
    2. Remove the rear seat backrest.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals