Removal and Installation

Vehicles with power windows 

1. Disconnect the battery ground cable.

   Vehicles with manual windows 

   Fig 1: Removing/Installing Front Door Manual Window Regulator Handle

   Courtesy of MAZDA MOTORS CORP.
2. Remove the front door manual window regulator handle.
   1. Release the clip.
   2. Remove the front door manual window regulator handle.

      All vehicles 

      Fig 2: Removing/Installing Front Door Latch Release Handle Bezel

      Courtesy of MAZDA MOTORS CORP.
3. Remove the front door latch release handle bezel.
   1. Remove the screw.
   2. Remove the front door latch release handle bezel.
      Fig 3: Removing/Installing Door Handle Cup Screw

      Courtesy of MAZDA MOTORS CORP.
4. Remove the door handle cup screw.
   Fig 4: Removing/Installing Front Door Trim Panel

   Courtesy of MAZDA MOTORS CORP.
5. Remove the front door trim panel.
   1. Remove the screws.
   2. Remove the front door trim panel and disconnect the electrical connector (vehicles with power windows only).
6. To install, reverse the removal procedure.