LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Floor Console - High Series >> Removal and Installation

Removal and Installation

Fig 1: Removing/Installing Floor Console Finish Panel
G01144886Courtesy of MAZDA MOTORS CORP.
  1. Remove the floor console finish panel.
    1. Apply the parking brake.
    2. Remove the floor console finish panel.
      Fig 2: Removing/Installing Floor Console Front Bolts
      G01144887Courtesy of MAZDA MOTORS CORP.
  2. Remove the floor console front bolts.
    Fig 3: Removing/Installing Floor Console
    G01144888Courtesy of MAZDA MOTORS CORP.
  3. Remove the floor console.
    1. Remove the two rear bolts.
    2. Remove the floor console.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals