LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Heated Glass/Defoggers >> Rear Window Defogger >> On-Vehicle Service >> Lead Terminal Repair

Lead Terminal Repair

  1. Obtain a repair kit.
  2. The vehicle should be allowed to reach 16°C (60°F) or above.
  3. Clean the area with denatured alcohol.
  4. Apply the epoxy to the repair area.
    Fig 1: Repairing Lead Terminal
    G01144360Courtesy of MAZDA MOTORS CORP.
  5. Hold the terminal in place on the bus bar with an appropriate tool.
  6. Apply epoxy to the repair area.
scientia non olet · About LEMON Manuals