LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle >> Stub Shaft Pilot Bearing Housing And Seal >> Removal

Stub Shaft Pilot Bearing Housing And Seal: Removal

  1. Remove the halfshaft assembly. Refer to HALFSHAFT - REAR .
    Fig 1: Removing Stub Shaft Seal
    G00986385Courtesy of MAZDA MOTORS CORP.
  2. To remove the seal only, use the special tools and remove the stub shaft seal.
    Fig 2: Removing Stub Shaft Pilot Bearing And Seal
    G00986386Courtesy of MAZDA MOTORS CORP.
  3. To remove the bearing and seal use the special tools and remove the stub shaft pilot bearing and seal.
scientia non olet · About LEMON Manuals