Stub Shaft Pilot Bearing Housing And Seal: Installation

Fig 1: Installing Stub Shaft Pilot Bearing

Courtesy of MAZDA MOTORS CORP.

NOTE:

• Lubricate the new stub shaft pilot bearing with rear axle lubricant.

1. To install the bearing, use the special tools, install the stub shaft pilot bearing.
   Fig 2: Installing Stub Shaft Pilot Bearing Housing Seal

   Courtesy of MAZDA MOTORS CORP.
   NOTE:

   • Lubricate the new stub shaft pilot bearing housing seal with grease.
2. To install the seal, use the special tools and install the stub shaft pilot bearing housing seal.
   CAUTION:

   • Inspect the inboard CV joint seal journal for rust or nicks/scratches prior to installing the halfshaft. If necessary, polish the seal journal with fine crocus cloth.
3. Install the halfshaft assembly. Refer to HALFSHAFT - REAR .