LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> High Mounted STOPLAMP Bulb >> Removal and Installation

Removal and Installation

Fig 1: Removing High-Mounted Stoplamp Assembly
G01144942Courtesy of MAZDA MOTORS CORP.
  1. Remove the high-mounted stoplamp assembly.
    1. Remove and discard the screws and washers.
      Fig 2: Removing High-Mounted Stoplamp Bulb Holder
      G01144943Courtesy of MAZDA MOTORS CORP.
  2. Remove the high-mounted stoplamp bulb holder from the lamp assembly by disengaging the snaps.
    Fig 3: Removing Bulb(s)
    G01144944Courtesy of MAZDA MOTORS CORP.
  3. Remove the bulb(s).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals