LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege SE (CANADA) L4-1.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Lamps and Indicators - Transmission and Drivetrain >> Lamps and Indicators - A/T >> Overdrive Indicator Lamp >> Testing and Inspection

Overdrive Indicator Lamp: Testing and Inspection

O/D OFF INDICATOR LIGHT INSPECTION
Inspection of Operation
1. Turn the IG SW from OFF to ON.

Note:
^ The O/D OFF indicator light flashes when any malfunction exists in the EC-AT system components.

2. Verify that the O/D OFF indicator light is not illuminating.
3. Depress the switch and verify that the O/D OFF indicator light illuminates.
^ If the O/D OFF switch does not function, inspect the O/D OFF switch, and then inspect the terminal voltage of the O/D OFF indicator light.

scientia non olet · About LEMON Manuals