Hydraulic Hose: Service Precautions

Clutch Pipe Removal/Installation Note
- When any clutch pipe has been disconnected anytime during the procedure, add brake fluid, bleed the air, and inspect for leakage after the procedure has been completed.
- When removing the clutch pipe, remove it using the SST (49 0259 770B). When installing the clutch pipe, change the clutch pipe tightening torque to allow for use of a torque wrench-SST (49 0259 770B)combination, and then tighten the clutch pipe using the SST (49 0259 770B).