Windshield Washer Switch: Testing and Inspection
WIPER AND WASHER SWITCH INSPECTIONWindshield Wiper and Washer
1. Disconnect the negative battery cable.
2. Remove the wiper and washer switch.
3. Inspect for continuity between the wiper and washer switch terminals using an ohmmeter.
- If not as specified, replace the wiper and washer switch.
Rear Wiper and Washer
1. Disconnect the negative battery cable.
2. Remove the wiper and washer switch.
3. Inspect for continuity between the wiper and washer switch terminals using an ohmmeter.
- If not as specified, replace the wiper and washer switch.