LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege SE (CANADA) L4-1.6L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Wiper and Washer Systems >> Windshield Washer Switch >> Service and Repair

Windshield Washer Switch: Service and Repair

WIPER AND WASHER SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the column cover. (See COOLING COVER REMOVAL/INSTALLATION.)




3. Remove in the order indicated below.
1. Connector
2. Screw
3. Wiper and washer switch

4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals