LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege SE (CANADA) L4-1.6L >> Repair and Diagnosis >> Restraints and Safety Systems >> Sensors and Switches - Restraints and Safety Systems >> Seat Belt Buckle Switch >> Testing and Inspection

Seat Belt Buckle Switch: Testing and Inspection

BUCKLE SWITCH INSPECTION

1. Disconnect the negative battery cable.
2. Disconnect the buckle switch connector.







3. Inspect for continuity between the buckle switch terminals using an ohmmeter.
- If not as specified, replace the front buckle.
scientia non olet · About LEMON Manuals