Oscilloscope Patterns and Waveforms

Shift solenoid A control
- PCM terminal: 82(+) - 103(-) Oscilloscope setting: 5 V/DIV(Y), 5 ms/DIV(X), DC range
- Vehicle condition: drive in the 4th gear




Shift solenoid B control signal
- PCM terminal: 9g(+) - 103(-)
- Oscilloscope setting: 5 V/DIV(Y), 5 ms/DIV(X), DC range
- Vehicle condition: Drive in D range, 1st gear




Shift solenoid C control signal
- PCM terminal: 102(+) - 103(-)
- Oscilloscope setting: 5 V/DIV(Y), 5 ms/DIV(X), DC range
- Vehicle condition: Drive in 1st or 2nd gear