LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege SE (CANADA) L4-1.6L >> Repair and Diagnosis >> Lighting and Horns >> Sensors and Switches - Lighting and Horns >> Hazard Warning Switch >> Testing and Inspection

Hazard Warning Switch: Testing and Inspection

HAZARD WARNING SWITCH INSPECTION

1. Remove the hazard warning switch.







2. Inspect for continuity between the hazard warning switch terminals using an ohmmeter.
- If not as specified replace the hazard warning switch.
scientia non olet · About LEMON Manuals