LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege SE (CANADA) L4-1.6L >> Repair and Diagnosis >> Lighting and Horns >> Sensors and Switches - Lighting and Horns >> Fog/Driving Lamp Switch >> Service and Repair

Fog/Driving Lamp Switch: Service and Repair

FRONT FOG LIGHT SWITCH REMOVAL/INSTALLATION




1. Disconnect the negative battery cable.
2. Remove the left side side panel from the dashboard.
3. Compress the tabs of the front fog light switch and pull the switch out of the dashboard.
4. Disconnect the connector to remove the front fog light switch.
5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals