LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege SE (CANADA) L4-1.6L >> Repair and Diagnosis >> Lighting and Horns >> Sensors and Switches - Lighting and Horns >> Brake Light Switch >> Testing and Inspection

Brake Light Switch: Testing and Inspection

BRAKE SWITCH INSPECTION





1. Disconnect the brake switch connector.





2. Inspect for continuity between the terminals of the brake switch connector using the ohmmeter.
^ If not as specified, replace the brake switch.
scientia non olet · About LEMON Manuals