LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege SE (CANADA) L4-1.6L >> Repair and Diagnosis >> Body and Frame >> Roof and Associated Components >> Sunroof / Moonroof >> Sunroof / Moonroof Motor >> Service and Repair

Sunroof / Moonroof Motor: Service and Repair

SUNROOF MOTOR REMOVAL

1. Disconnect the negative battery cable.
2. Remove the headliner.




3. Disconnect the connector.
4. Remove the screws, and then remove the sunroof motor.

SUNROOF MOTOR INSTALLATION

1. Connect the sunroof motor connector.
2. Connect the sunroof switch connector.
3. Connect the negative battery cable.
4. Turn the ignition switch to ON position.
5. Press the CLOSE side of the slide switch until the sunroof motor stops.
6. Disconnect the sunroof switch connector.
7. Install the screws, and then install the sunroof motor.
8. Install the headliner.