LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege LX, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Meter Hood Removal/Installation

Meter Hood Removal/Installation

  1. Remove the screws.
  2. Pull the meter hood toward you, then remove clips A and pins B from the dashboard.
    Fig 1: Removing/Installing Meter Hood
    G01186362Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals