LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2001 >> Tribute LX, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Brake Drum >> Installation

Rear Brake Drum: Installation

  1. To install, reverse removal procedure. Apply lithium base grease to wheel cylinder and anchor sliding parts, adjuster threads and shoe contact points on backing plate.
  2. Install primary and secondary shoes in original positions (secondary shoe is longer). Adjust brake shoes. See REAR BRAKE SHOES  under ADJUSTMENTS. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS  . Bleed air from system. See BLEEDING BRAKE SYSTEM  .
scientia non olet · About LEMON Manuals