LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2001 >> B4000 SE, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Brake Shoes & Wheel Cylinders >> Removal

Rear Brake Shoes & Wheel Cylinders: Removal

  1. Raise and support vehicle. Remove rear wheel assemblies. Remove brake drum. Machine or replace drum as necessary if inner diameter is not as specified. See DRUM BRAKE SPECIFICATIONS  table.
  2. Remove secondary shoe return spring, then primary shoe return spring. Remove adjuster cable, cable guide, adjusting lever return spring and adjusting lever. Remove adjusting lever spring and adjusting screw. See Figure .
  3. Remove parking brake strut, hold down springs and shoes. Disconnect parking brake cable from lever. Disassemble parking brake lever from shoe by removing retaining clip and spring washer. See Figure .
  4. Remove brake cylinder-to-shoe connecting links. Disconnect brake line from brake cylinder. Remove brake cylinder.
scientia non olet · About LEMON Manuals