Output State Control Modes: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2003 Mazda B4000, 2003 Mazda B3000, 2003 Mazda B2300, 2002 Mazda B4000, and 2002 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TR sensor and VSS must be operational to enter OSC modes. No DTCs may be present for TR and VSS sensors before entering OSC modes.

OSC modes allow control of some parameters for specific operation. OSC has 2 modes of operation: Bench Mode and Drive Mode. Each mode has a unique set of vehicle operation requirements that must be met before OSC operation will be allowed. If vehicle requirements are not met, an error message will be displayed and OSC mode will be aborted. Follow OSC PRELIMINARY PROCEDURES before entering into OSC modes.