LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Diagnostics >> Clearing Past Malfunction DTCS

Clearing Past Malfunction DTCS

  1. Turn ignition on. Using a jumper wire, short DLC terminal SCN (Gray/Black wire) to ground for 0.5-1.5 seconds, 3 times. See Figure. Then ground DLC terminal SCN and ensure past malfunction DTCs are not displayed. Repeat if past malfunction DTCs are displayed. If DTCs are not displayed, disconnect jumper wire and turn ignition off.
scientia non olet · About LEMON Manuals